Cleaning And Maintenance Of The Grinder

Do not stay away from the machine during use to prevent malfunction and damage to the machine. Do not subject the grinder to undue vibration and unnecessary shock. Do not touch operating buttons or switches with wet hands. It should be ensured that the grinder power supply uses the correct voltage and frequency. Ensure that the grinder is adequately grounded.

Do not touch rotating parts during use. When disassembling and assembling the grinding chassis or other parts, professional personnel should not disassemble or install the parts of the grinding machine without permission. Grinding personnel pay attention to the grinding fluid or grinding when grinding
Water should not seep into the grinder to prevent damage to the grinder.

Self-inspection before grinding, the grinding machine should be carefully checked to ensure the normal rotation and revolution of the grinding machine before grinding. The abrasive paper should be carefully checked and not pasted incorrectly to prevent unnecessary waste of consumables. The sequence of sticking and wear and replacement of the sandpaper should be carefully checked.

Maintenance and maintenance: In order to keep the grinder in normal working condition, the following maintenance procedures should be carried out after each use of the machine. After each grinding, or to stop grinding - for a period of time, all grinding discs on the machine should be thoroughly cleaned with water. Otherwise, the residual grinding fluid and grinding water will dry, harden or penetrate into the grinder and cause damage to the machine.